What Are SPC Wall Panels
SPC wall panel stands for Stone Plastic Composite wall panel, mainly made of PVC resin and calcium carbonate. Produced under high temperature and pressure, it combines a decorative layer, wear layer, and a waterproof core with a UV coating surface. The panels feature a click-lock system, making them easy for DIY installation. Lightweight yet durable, SPC wall panels are widely used for interior walls, especially in bathrooms, as a smart alternative to traditional tiles.
Get these five preparations done in advance
1. Tools and materials you’ll need
Except for SPC Wall Panel and accessories,prepare the following tools and materials: a spirit level, pencil, tape measure, utility knife, soft steel rule, double-sided tape, masking tape, structural adhesives, laser level, suction cups, safety goggles, and a safety helmet. These essential tools will help ensure a smooth and safe SPC wall panel installation process.

2. Wall surface requirements
The base wall must be flat, smooth,clean and dry.
3. Stable temperature conditions
Keep the indoor temperature around 10°C-25°C during the installation.
4. Humidity Stability
The moisture content of the wall is ≤8%. Moisture-proof measures are required when necessary.
5. Measuring and planning
Measure the installation area and plan an extra 5-10% of panels for waste.
7 Step Installation Guide
Step 1 – Make sure the wall flat

Step 2 – Measure and cut the SPC panels


Step 3 – Glue with silicone and double-side tape

Step 4 – Start installation from a corner

Step 5 – Align and interlock the panels


Step 6 – Finishing touches and edge treatments

Step 7 – Remove protection film and finish installation

Watch the Installation Video
Frequently Asked Questions (FAQ)
Can SPC wall panels be installed as a DIY project?
SPC wall panels are designed with a click system and are lightweight at only 8 kg/m², making them easy to install as a DIY project with simple tools.
Do I need any special tools?
You only need a spirit level, pencil, tape measure, utility knife, soft steel rule, double-sided tape, masking tape, structural adhesives, laser level, suction cups, safety goggles, and a safety helmet.
How soon can I use the room after installation?
After installation, allow the panels to sit for 48 hours in a well-ventilated environment before regular use.

Leave a reply to Locking Systems of SPC Wall Panels – SPC Wall Panel Cancel reply